Top 17 Best solar charge controllers for lifepo4 batteries in 2022

Finding the right solar charge controllers for lifepo4 batteries hasn’t been simple with everything these interchange choices available. It’s hard to know what to buy, which is why we’ve put together this list of favorites as a result you can locate the absolute one based upon your needs and wants.

All of the solar charge controllers for lifepo4 batteries listed here are independent. When you purchase everything through our website, we receive a commission from Amazon without costing you everything more than what it would if you went straight to Amazon.

Followings are the best-selling solar charge controllers for lifepo4 batteries on Amazon:

If you’re looking for the perfect solar charge controllers for lifepo4 batteries, check out our broad line-up of different models.

Best solar charge controllers for lifepo4 batteries

In this section, we have compiled some of the most popular solar charge controllers for lifepo4 batteries around. Making your decision easier, we have listed some key features for each of these solar charge controllers for lifepo4 batteries.

Renogy Wanderer Li 30A 12V PWM Negative Ground Solar Charge Controller Solar Panel Regulator w/ Temp Sensor Function Fit for Lithium, Sealed, Gel, and Flooded Batteries, Wanderer Li 30A
  • 【Optimized for 12V Batteries】Compatible with 12V battery banks on the market, including lithium batteries. The LED indicators allow you to set battery types and check the charging staus with ease.
  • 【Smart 4-Stage PWM Charging】Smart 4-Stage PWM charging (Bulk, Boost, Float, and Equalization) increases battery life and improves system performance. Intelligent protection against reverse polarity, overcharging, short-circuit, and reverse current.
  • 【Compact in size】Which makes it easy to install virtually anywhere.
  • 【Multiple battery adaptation】 Deep Cycle Sealed (AGM), Gel, Flooded and Lithium battery option ready.
  • 【Wanderer10A|30A Installation Notes】 The default starting position of the Wanderer controller terminal hatches are closed (in the UP position) that could mistakenly look like an open wire hatch. Make sure to FIRST lower each terminal hatch by screwing the terminals counterclockwise (CCW) to expose the wire terminal hatch to the open position. THEN secure each cable by rotating the screws clockwise (CW) to the closed position.
EpRec 30A 12V 24V PWM Solar Charge Controller Lithium Battery Charge Controller Compatible with Lead Acid/ Lithium-ion/ Lithium Iron Phosphate Battery
  • 【Upgraded Solar Panel Controller】This 30a solar charge controller compatibility with 12V 24V system.Fully 4-Stage PWM charge (Boost, ABS, Equalization,Float),the power MOSFET is used as and electronic switch without any mechanical switches and equipped with industrial-grade STM 8 microprocessor to prolong your battery life cycle.
  • 【LCD Display】Backlight LCD display PV/Battery/Load charge and discharge parameter.Dual USB can give your electronic product max 5V 2.5A.
  • 【Intelligent Control】This solar controller fit for lithium-ion/ lithium iron phosphate /Lead-acid batteries(OPEN,AGM,GEL,) with mutiple load timer(Load should be DC).It has a wide range of applicability and automatically identifies daytime/night.For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically.
  • 【Safe to Use】PWM charge controller Protection:Dual MOSFET Reverse current /over heat /Under-voltage discharge discharge /short-circuit /open-circuit / over-load /over-charging protection.more safe for home, industrial,commercial etc.
  • 【Customer First】12 months honor warranty from EpRec and 24hrs after service.Your satisfaction is our priority.
Intelligent 10A MPPT Solar Charge Controller, 10 Amp 12 Volt Solar Panel Regulator with Digital LCD Display + Temp Sensor + Polarity Adapter for 12 Volt Wet Gel AGM Lithium LiFePO4 Battery
  • [ MPPT Charge Controller + Polarity Adapter ] A polarity adapter is required in case that your solar panels are not compatible with our MPPT charge controller. If the solar panel was compatible, please purchase “ 10A MPPT ” ASIN : B09F697FBV ; If NOT compatible, please purchase “ 10A MPPT + Polarity adapter” ASIN: B09W5YCRR7.
  • [ Compact & Portable ] Improved over the PMW charge controller, Allto Solar MPPT (Maximum Power Point Tracking) charge controller bringing a new generation to maximizing use solar power to charge your system, it is 25% smaller in size but captures as high as 15%-30% performance to charge the battery with no additional self power consumption. High tracking efficiency of up to 95% while PMW charge controller is 65%-80%. Automatically detect 12V DC system voltage.
  • [ Multi-protection to Ensure Safety ] Built in over temperature protection, over voltage protection, over current protection, over charging protection, over discharging protection, over load protection, short circuit protection to provide full protection for your battery, to maximally avoids the damage due to system fault or installation error.
  • [ Works with Multiple Batteries ] Compatible with AGM, Gel, Deep Cycle Sealed, Gel, Flooded and LiFePO4 Lithium Battery. 3 stage charging: boost, float, and equalization to get the maximun use of solar energy. Great for deep cycle, starter, marine, car, powersport and more.
  • [ Visual Monitor ] Equipped with visual LED display to monitor the real-time solar current and the battery voltage and to know the exact working condition of the solar panel and battery. Completely powered by solar directly, no power consumption for the battery! Come with auto memory function, automatically return to its last selected mode.
30amp Charge Controller, PWM Solar Controller 30A Fit for MAX 1500W Solar Power 12V 24V 36V 48V Lithium/AGM/Gel/Flooded Battery
  • 30A PWM solar controller, Intelligent controller able to choose 12V/24V/36V/48V Lead-acid battery (Sealed, Gel, Flooded) and Lithium battery (LiCoMnNiO2, LiFePO4)
  • Multiple load control modes: 24Hours Working Control, Light Control, Light and Dual Time Control
  • Controller Automatic temperature compensation and Full protection, like Reverse-Polarity, Battery Reverse, Over-Heating,Over-Current, Over-Load, Low-Voltage Lightning Protection.
  • 4 stages PWM charging: Bulk, Absorption, Equalize, Float;
  • Double USB output 5V/2A and LCD display with Back-lighting shows device’s operating data and working condition
Peidesi PWM 30A Solar Charge Controller 12V 24V PV Regulator for Lifepo4 Lithium Gel Lead Acid for 100W 200W 300W Solar Panel LCD Display Dual USB 5V Output
  • Wide Compatibility: The Solar Charge Controller is automatically compatible with 12V or 24V systems and is suitable for a variety of batteries: lead-acid batteries, lithium iron phosphate batteries, and ternary lithium batteries.
  • Safe to Use: The Solar Panel Controller has overcurrent short circuit protection, reverse polarity protection, and low voltage overcharge protection. adopts full 3-level PWM charge management.
  • LCD Display: The Solar Panel Charge Controller has a large LCD, which can switch modes and adjustable parameters, clearly indicating the status and data.
  • Intelligent and Useful: The Solar Controller has a built-in industrial microcontroller, which automatically manages and memorizes various parameters set by the user, and the data will not be lost when the battery is exhausted.
  • Easy to Apply: The Solar Charge Controller should connect the battery first, then the solar panel, and finally the load. It can be used for home, industry, commercial, camping RV, etc.
Renogy Voyager 20A 12V/24V PWM Waterproof Solar Charge Controller w/ LCD Display for AGM, Gel, Flooded and Lithium Battery, Used in RVs, Trailers, Boats, Yachts, Voyager 20A
  • 4-STAGE PWM Technology: The Voyager controller is equipped with advanced smart PWM technology with high charging efficiency. It provides 4-stage charging (Bulk, Absorption, Float and Equalization) in order to protect the battery.
  • IP67 Rated Waterproof: With an IP67 rated waterproof design, the Voyager controller is suitable for outdoor use and will remain fully operational when exposed to water spray, rain, or condensation.
  • Multiple Protections: The Voyager controller has multiple intelligent protections against reverse polarity, over charge, short-circuit, reverse current, overload, and over discharge, keeping your battery fully protected.
  • Support Multiple Battery Types: The Voyager controller can automatically sense 12V or 24V system voltage when paired with a Gel, AGM, or Flooded batteries. It also comes with a Lithium activation feature.
  • Backlit LCD displaying system: The Voyager comes with an LCD display showing accurate and timely information including charging current, generated energy, temperature, battery voltage, and error codes that allows users to monitor and control charging.
ExpertPower 10A PWM Solar Charge Controller for LifePO4 Battery | 12V / 24V Auto-Select Intelligent Regulator | Max PV Input 55V | USB Charge | Backlight LCD Display
  • This bundle includes one 10A PWM Solar Charge Controller, one pair 10ft 12AWG MC4 Solar Cables, one pair 6ft 12AWG Battery Cables and one set Y Branch Adapter Cable.
  • System Detect: The 10A PWM controller automatically recognizes 12V and 24V systems for quick setup. Compatible with LiFePO4/ Lithium, AGM, Gel, and Flooded batteries.
  • Smart Tech: The controller automatically regulates charging profiles relative to ambient temperatures, providing the best level of charge in any condition and protecting against over-charge, over-discharge, overload, and short circuit
  • Digital Display: The unit offers an ease-of-access screen interface, displaying data ranging from state of charge to battery health. Premium Quality: The controller is built on an industrial-grade chassis, able to withstand all sorts of abuse in harsh conditions
  • ExpertPower: All ExpertPower Charge Controllers operate at their full potential with an ExpertPower LiFePO4 battery.
HUINETUL 12V 24V 20A IP68 Waterproof Solar Charge Controller Lithium ion Lifepo4 Lead-Acid Battery Regulator with IR Remote Controller
  • IP68 waterproof grade, it can be used for outdoor solar system, made with premium aluminum alloy shell, with cables/heat sink/4pcs mounting holes.
  • Can fits for 3 types of batteries, you can use it to charge 3S/6S lithium ion battery, 4S/8S lifepo4 battery and all kinds of lead acid batteries.(Flooded Sealed, AGM or GEL)
  • With IR remote control, the remote distance is about 4M to 5M, offer several working mode for your choice, it has 24hr working mode, Dust to dawn working mode, and you also can set the working hours for load based on dust to dawn working mode, then can meets your specific using demand
  • Can be used for both 12V and 24V solar system, it can senses if it’s 12V or 24V automatically after activated by enough voltage battery. Default battery type is for lead acid. After you choose battery type by remote control, the voltage will changes to match your connected battery (like11.1V/12.8V/22.2V/25.6V), with power-off memory function
  • With 4pcs LED lights to help you know the working status of the controller, has all the necessary protection: short circuit protection, reverse protection, over charging protection and over load protection. Fully 4-stage PWM charge management.
EPEVER 40A MPPT Solar Charge Controller 100V PV Max Input Negative Ground LiFePo4 Battery Charger W/ MT50 Remote Meter & Temperature Sensor Tracer4210AN
  • Negative Grounding Design and advanced MPPT control algorithm make it charging efficiency no less than 99.5%, it maximize the charging power as a way of saving the energy.
  • 100V Max PV Input allow you connect 4 x12V solar panel connecting in series, it minimize the charging current on solar panel 's leads to save power loss.
  • Compatible with LiFePO4 & Li(NiCoMn)O2 Batteries, with built in preset lithium battery type, it's not require setting charging parameters for lithium batteries.
  • Work with both 12v battery system and 24v battery system, It allows 24V Solar Panels (or Even Higher Voltage) Charging 12v/24v Battery
  • Standard Modbus communication protocol with RS485 interface , it can be monitored by cellphone APP(eBox required) , PC Software and MT50 remote meter
ExpertPower 20A 12/24V Intelligent PWM Solar Charge Controller with Adjustable Parameter LCD Display, Dual USB Ports, for AGM, Gel, LiFePO4
  • This controller is suitable for 12/24V lead -acid batteries, ternary lithium batteries and lithium iron phosphate batteries, FLD/GEL/LiFePO4/AGM.
  • 32 Bit High-Speed Master control chip. Large screen LCD for display, charge and discharge parameters adjustable. Complete multi-stage PWM charge management.
  • Dual USB port , maximum current up to 2A, supporting high current charging of Phone ,tablets, and other devices.
  • Built-in reverse connection protection, open -circuit protection, high temperature protection ,over -current / short-circuit protection, which are all self - recovery type, with no damage to the controller. Double MOS anti-backflow circuit , ultra -low heat generation.
  • Package come with 6pcs spade terminals, make your wiring safe and convenience.

You can now buy some of the best solar charge controllers for lifepo4 batteriess upon Amazon. Below is a list of some of the best solar charge controllers for lifepo4 batteriess that you can currently buy. We highly recommend looking at whatever of the features and specifications included later each solar charge controllers for lifepo4 batteries below past deciding which one to purchase. This will assist ensure you choose the product that will enactment best for your needs and we guarantee they won’t disappoint!

If you’re impatient in buying solar charge controllers for lifepo4 batteries, then look no additional than our further articles approximately the best ones out there.